Ministry of Economic Development Home| Contact MED|


 
 
 

Links to this page were:

Section Subnavigation Links:

Tariff Industry Assistance (Advertisement) Notice No. 2003/19

[ Last Updated 11 January 2006 ]
Status:Archived

Applications Advertised for Objection

Closing Date for Objections 17 June 2003

  1. Notice is hereby given that the following applications have been made in respect of the goods advertised in the Schedule to this notice. Any person wishing to lodge an objection should do so in writing, to the Ministry of Economic Development, PO Box 1473, Wellington, Fax 04-474 2843 indicated by the reference number, before 17 June 2003. All submissions should include:
    • the Tariff Industry Assistance (Advertisement) Notice number;
    • the Tariff item; and
    • Reference number.
  2. All submissions from local manufacturers should include:
    • the range of alternative goods made locally;
    • the grounds on which objection is made (including reasons why the local product is a suitable alternative);
    • present and potential output;
    • details of factory cost in terms of materials, labour, overheads, including the proportion of domestic and imported content.
  3. Where further information is required in order to make a submission an objector should contact the applicant in writing and refer a copy of the enquiry to the Ministry of Economic Development quoting the details in paragraph 1 above.
Tariff ItemDescription of GoodsName and Address of ApplicantPart II Ref.Appn. Ref. No.*Category of Appn.
3405.30.00Automotive polish/and paint restorersGriffiths Equipment Ltd
C/- National Customs & Travel Consultants Ltd
PO Box 22329
Otahuhu
AUCKLAND
99999613DA
3906.90.01Efka 3570Polychem Marketing Ltd
PO Box 6435
AUCKLAND
99999611HA
4202.12.00)
4202.92.09)
7318.15.09)
7318.16.00)
7318.22.00)
7320.90.29)
8414.59.09)
Catalogued parts and accessories for Paslode Impulse tools for use in the hand with self contained motorITW Constructions
C/- PO Box 73021
AUCKLAND AIRPORT
99999608HA
8705.30.00Six only fire fighting vehicles, consisting of cab chassis, aerial device and water pumps onlyFraser Fire & Rescue Ltd
C/- Danzas AEI
PO Box 1744
WELLINGTON
99999607KIM
87.08CURRENT APPROVAL:
Parts and accessories of motor vehicles falling within Tariff heading
No. 87.01,87.02, 87.03, 87.04 or 87.05
EXCLUDING:
Adaptor plates to fit Isuzu and Cummins engines
Air dams
Arm rests
Automatic transmission oil coolers other than aluminium wafer type coolers and amphibious vehicle automatic transmission oil coolers
Axle assemblies for trailer and tag operation viz: axle beams, axle spindles, brake shoes, camshafts, brake spiders, back plate assemblies, brake shoe pins, brake shoe springs, brake shoe rollers, bushes, bearing housings, camshaft brackets, dust covers, wheel studs, wheel nuts, axle nuts, axle washers, hubs (stud and spoked), brake drums
Bonnetguards
Bull bars
Canopies
Couplings, trailer and truck (other than semi-trailer fifth wheel couplings of Tariff heading 87.16)
Cut segments of motor vehicles apart from nose cuts and bum (rear) cuts. (The nose cut of a motor vehicle is the front assembly forward of and including the radiator support rail and radiator. Bum cuts of motor vehicles comprise only the rear bumper, rear panel and rear lights)
Disc brake pad assemblies and disc pad kits
Door control systems, air, air-bleed or vacuum operated, viz: single/double folding (jacknife), single/double gliders
Engines
Exhaust pipes
Exhaust systems (comprising piping and mufflers)
External luggage racks
Glare stops
Headlight covers
Interior trim components of hardboard, cardboard or similar materials, leather or plastic sheetings, cut to shape
Melt sheet, cut to shape
Moulded wellside deckliners other than those for Chevrolet and Ford F series vehicles
Mufflers, silencers, resonators
Seat belts
Spoilers of plastic
Steering wheels
Towballs
Upholsterers materials (such as flock, wadding, batting, fluting, linters, padding, foam) cut, moulded or fabricated to shape
Upholsterers textiles, fabrics, leather, or plastic sheetings, cut, moulded or fabricated to shape
Weathershields
Wheel balance weights
Wheel spinners for use on steering wheels
Wheels of steel with tyres thereon (excluding; space saver wheels, with tyres attached, of the following sizes, viz: T105/80D13, T105/70D14, T115/70D14, T125/70D15, T135/90D15, T125/70D16)
 99999494HV
87.08REQUESTED APPROVAL:
Parts and accessories of motor vehicles falling within Tariff heading
No. 87.01,87.02, 87.03, 87.04 or 87.05
EXCLUDING:
Adaptor plates to fit Isuzu and Cummins engines
Air dams
Arm rests
Automatic transmission oil coolers other than aluminium wafer type coolers and amphibious vehicle automatic transmission oil coolers
Axle assemblies for trailer and tag operation viz: axle beams, axle spindles, brake shoes, camshafts, brake spiders, back plate assemblies, brake shoe pins, brake shoe springs, brake shoe rollers, bushes, bearing housings, camshaft brackets,
dust covers, wheel studs, wheel nuts, axle nuts, axle washers, hubs (stud and spoked), brake drums
Bonnetguards
Bull bars
Canopies
Couplings, trailer and truck (other than semi-trailer fifth wheel couplings of Tariff heading 87.16)
Cut segments of motor vehicles apart from nose cuts and bum (rear) cuts. (The nose cut of a motor vehicle is the front assembly forward of and including the radiator support rail and radiator. Bum cuts of motor vehicles comprise only the rear bumper, rear panel and rear lights)
Disc brake pad assemblies and disc pad kits
Door control systems, air, air-bleed or vacuum operated, viz: single/double folding (jacknife), single/double gliders
Engines
Exhaust pipes
Exhaust systems (comprising piping and mufflers)
External luggage racks
Glare stops
Headlight covers
Interior trim components of hardboard, cardboard or similar materials, leather or plastic sheetings, cut to shape
Melt sheet, cut to shape
Moulded wellside deckliners other than those for Chevrolet and Ford F series vehicles
Mufflers, silencers, resonators
Seat belts
Spoilers of plastic
Griffiths Equipment Ltd
C/- National Customs & Travel Consultants Ltd
PO Box 22329
Otahuhu
AUCKLAND
99999610KV
+     
 Towballs
Upholsterers materials (such as flock, wadding, batting, fluting, linters,
padding, foam) cut, moulded or fabricated to shape
Upholsterers textiles, fabrics, leather, or plastic sheetings, cut, moulded or fabricated to shape
Weathershields
Wheel balance weights
Wheel spinners for use on steering wheels
Wheels of steel with tyres thereon (excluding; space saver wheels, with tyres attached, of the following sizes, viz: T105/80D13, T105/70D14, T115/70D14, T125/70D15, T135/90D15, T125/70D16)
    
87.12)
87.14)
Bicycles, bicycle componentry spare parts or accessoriesPenny Sports Cycles Ltd
C/- Owens Global Freight
PO Box 4144
WELLINGTON
99999612FA

Category of Application

A-General Approval
CE-Capital Equipment
IM-Inputs to Manufacturing - Inability to Supply
MS-Manufacturers' Samples
RUC-Revocation of Unused Concession
S-Shortfall
SS-Special Situation
V-Variation of Existing Concession
W-Withdrawal of Concession
+-Denotes amendment or addition

 

Dated at Wellington this 22nd day of May 2003.V.A. MANKS, Ministry of Economic Development.
Back to Top