Ministry of Economic Development Home| Contact MED|


Jump to Site Navigation Links
 
 
 

Links to this page were:

Section Subnavigation Links:

Tariff Concession Approvals, Withdrawals and Declines Notice (No. 26) 2003

[ Last Updated 11 January 2006 ]
Status:Archived

I, Vincent Anthony Manks, Executive Officer, Ministry of Economic Development, acting pursuant to section 8 of the Tariff Act 1988 under delegated authority hereby:

  1. In accordance with Part II of the Tariff approve in respect of the entry of goods listed in the First Schedule to this notice the rates of duty or exemptions from duty specified in that Schedule with effect from the first day of the month so specified; and
  2. In accordance with Part II of the Tariff approve in respect of the entry of goods listed in the Second Schedule to this notice the exemptions from duty specified in that Schedule with effect from the first day of the month so specified subject however to such purposes and conditions which I prescribe
  3. Withdraw with effect fourteen days from the date of this Gazette, or otherwise at the date so specified, the approvals granted in respect of the entry of goods listed in the Third Schedule to this notice
  4. Decline to approve in respect of the goods listed in the Fourth Schedule to this notice concessions for which application was made.

First Schedule: Concessions Approved

   Rates of Duty  Effective 
*Tariff ItemDescription of GoodsNormalPref.Part II Ref.Ref. No.FromTo
V3917.21.00)
3926.90.69)
7326.90.09)		HDPE cross linked tubing of sizes 15mm to 26mm OD, and polyethylene pipe guides to suit 15mm and above, and metal holding plates/brackets for the mounting of fittingsFreeFree99999619C5/03..
A3919.10.01Labelling tape of polyester, laminated and self-adhesiveFreeFree99999621E3/03..
V42.02Textile cases, containers, travel goods, specially designed to carry laptop computersFreeFree99999623A5/03..
A4417.00.21Paint-brush handlesFreeFree99999616J5/03..
V6403.91.11)
6403.91.19)
6403.99.11)
6403.99.19)
6404.11.12)
6404.11.15)
6404.11.21)
6404.11.29)		Footwear, designed and manufactured specifically for rock climbingFreeFree99999615L5/03..
V72.14Hot rolled steel flat bars of the following sizes, viz:
25x3, 25x5, 25x6, 25x8, 25x10
40x3, 40x5, 40x6, 40x8, 40x12
50x3, 50x8, 50x16, 50x20, 50x25
75x6, 75x8, 75x10, 75x12, 75x25
150x8, 150x25
40x16, 65x5, 65x16, 65x20, 65x25, 100x5, 130x20, 150x5		FreeFree99999622C5/03..
A7326.90.09Lawn or garden edging, of 1.6mm thick pre-painted mild steel, electro-galvanised in 1 metre lengths with 6 x 94mm ground spikesFreeFree99999617G5/03..
A8424.89.18Pneumatic decontamination showersFreeFree99999618E5/03..
X8479.89.00Peristaltic pumpsFreeFree99620419J1/88..
X87.08Parts and accessories of motor vehicles falling within Tariff heading
No. 87.01, 87.02, 87.03, 87.04 or 87.05
EXCLUDING:
Adaptor plates to fit Isuzu and Cummins engines
Air dams
Arm rests
Automatic transmission oil coolers other than aluminium wafer type coolers and amphibious vehicle automatic transmission oil coolers
Axle assemblies for trailer and tag operation viz: axle beams, axle spindles, brake shoes, camshafts, brake spiders, back plate assemblies, brake shoe pins, brake shoe springs, brake shoe rollers, bushes, bearing housings, camshaft brackets, dust covers, wheel studs, wheel nuts, axle nuts, axle washers, hubs (stud and spoked), brake drums
Bonnetguards
Bull bars
Canopies
Couplings, trailer and truck (other than semi-trailer fifth wheel couplings of Tariff heading 87.16)
Cut segments of motor vehicles apart from nose cuts and bum (rear) cuts. (The nose cut of a motor vehicle is the front assembly forward of and including the radiator support rail and radiator. Bum cuts of motor vehicles comprise only the rear bumper, rear panel and rear lights)
Disc brake pad assemblies and disc pad kits
Door control systems, air, air-bleed or vacuum operated, viz: single/double folding (jacknife), single/double gliders
Engines
Exhaust pipes
Exhaust systems (comprising piping and mufflers)
External luggage racks
Glare stops
Headlight covers
Interior trim components of hardboard, cardboard or similar materials, leather or
plastic sheetings, cut to shape
Melt sheet, cut to shape
Moulded wellside deckliners other than those for Chevrolet and Ford F series vehicles
Mufflers, silencers, resonators
Radiator cores and assemblies
Seat belts
Spoilers of plastic
Towballs
Upholsterers materials (such as flock, wadding, batting, fluting, linters,
padding, foam) cut, moulded or fabricated to shape
Upholsterers textiles, fabrics, leather, or plastic sheetings, cut, moulded or
fabricated to shape
Weathershields
Wheel balance weights
Wheel spinners for use on steering wheels
Wheels of magnesium, aluminium alloys, (less than 17" (43.18cm) in diameter),
whether one piece construction or composite with tyres thereon
Wheels of steel with tyres thereon (excluding; space saver wheels, with tyres
attached, of the following sizes, viz:
T105/80D13, T105/70D14, T115/70D14, T125/70D15, T135/90D15, T125/70D16)		FreeFree99999684C8/03..
A9506.29.00Battery-powered propeller units, of a type used for towing an in-water operatorFreeFree99999620G4/03..

Second Schedule: Concession Approvals Subject to Prescribed Purposes and Conditions

   Rates of Duty  Effective
*Tariff ItemDescription of GoodsNormalPref.Part II Ref.Ref. No.FromTo
IM5111.30.0880% wool, 20% polyamide - 2000m²FreeFree99999662B6/032/04
IM5112.11.08
5112.11.08
5112.11.08
5112.19.00
5112.19.00
5112.19.00
5112.19.00
5112.19.00
5112.19.00
5112.30.08		93% wool, 7% viscose - 500m²
96% wool, 4% viscose - 450m²
96% wool, 4% polyester - 550m²
92% wool, 6% viscose, 2% polyester - 400m²
100% wool - 350m²
100% wool - 400m²
100% wool - 450m²
100% wool - 500m²
100% wool - 800m²
68% wool, 27% polyester, 5% viscose - 400m²		FreeFree99999663L6/032/04
X6002.90.2395% polyester, 5% spandex bedford knit - 22,800m²FreeFree99999152C6/027/03

Third Schedule: Concession Approvals Withdrawn

   Rates of Duty  Effective
 Tariff ItemDescription of GoodsNormalPref.Part II Ref.Ref. No.FromTo
 3917.21.00HDPE ... OD......998722D....
 42.02Textile ... computers......992587C....
 6403.91.11)
6403.91.19)
6403.99.11)
6403.99.19)
6404.11.12)
6404.11.15)
6404.11.21)
6404.11.29)		Rockclimbing ... uppers......740274A....
 72.14Hot ... 150x25......998787J....
 87.08Parts ... T125/70D16)......999610K..7/03

Fourth Schedule: Applications for Concessions Declined

 Tariff ItemDescription of GoodsRef. No.  
 8708.29Airdams and plastic spoilers suited for use on Honda motor vehicles   999624K  

Category of Approval

A-General Approval
CE-Capital Equipment
GT-Goods in Transit
IM-Inputs to Manufacturing - Inability to Supply
MS-Manufacturers' Samples
RUC-Revocation of Unused Concession
S-Shortfall
SS-Special Situation
V-Variation of Existing Concession
X-Administrative Amendment

The concessions approved subject to prescribed purposes and conditions as listed in the Second Schedule to this notice will not be published in the Consolidated List of Approvals. 

Dated at Wellington this 10th day of June 2003.V.A. MANKS, Ministry of Economic Development.
Back to Top


Jump to main page content.