Ministry of Economic Development Home| Contact MED|


Jump to Site Navigation Links
 
 
 

Links to this page were:

Section Subnavigation Links:

Tariff Concession Approvals, Withdrawals and Declines Notice (No. 46) 2003

[ Last Updated 10 January 2006 ]
Status:Archived

I, Vincent Anthony Manks, Executive Officer, Ministry of Economic Development, acting pursuant to section 8 of the Tariff Act 1988 under delegated authority hereby:

  1. In accordance with Part II of the Tariff approve in respect of the entry of goods listed in the First Schedule to this notice the rates of duty or exemptions from duty specified in that Schedule with effect from the first day of the month so specified; and
  2. In accordance with Part II of the Tariff approve in respect of the entry of goods listed in the Second Schedule to this notice the exemptions from duty specified in that Schedule with effect from the first day of the month so specified subject however to such purposes and conditions which I prescribe
  3. Withdraw with effect fourteen days from the date of this Gazette, or otherwise at the date so specified, the approvals granted in respect of the entry of goods listed in the Third Schedule to this notice
  4. Decline to approve in respect of the goods listed in the Fourth Schedule to this notice concessions for which application was made.

First Schedule: Concessions Approved

   Rates of Duty  Effective
*Tariff ItemDescription of GoodsNormalPref.Part II Ref.Ref. No.FromTo
X5702.41.11)
5702.41.19)
5702.42.19)		Machine woven floor rugsFreeFree99999455G1/03..
AChapter 61)"Babies" and young infants clothing of kinds and sizes, as specified belowFreeFree99999822F9/03..
 Chapter 62)SHORTALLS
One piece short legged outer-garment with bib front and shoulder straps.
Garment not to exceed maximum length of 51cm shoulder to crutch and 62cm shoulder to hem		      
V70.07Motor vehicle glassFreeFree99999823D10/03..
A7010.90.25400ml stacker twist jarsFreeFree99999833A10/0312/05
A7010.90.38300ml stacker twist jarsFreeFree99999834K10/0312/05
A7308.90.00Aircraft maintenance platform of steelFreeFree99999824B9/0312/03
V84.65Machine-tools for working wood, cork, bone, hard rubber, hard plastic or similar hard materials;
EXCLUDING:
1. Sawbenches with sawblades not exceeding 330mm
2. Radial arm saws, overhead crosscut saws, trenching machines and work centres incorporating a radial arm saw, with blade diameters up to and including 360mm diameter
3. Pendulum type crosscut saws including spida type for sawblades up to and including 450mm diameter
4. Thicknessers, with a width capacity up to and including 330mm
5. Surface planers, buzzers, or jointers with a blade not exceeding 310mm
6. Bandsaws with a throat capacity not exceeding 475mm
7. Wood lathes manually operated, with or without copy device
8. Horizontal dowel boring machines with manual feed
9. Drill presses bench or floor mounting, column type, belt driven, manually operated
10. Glue reactivation edgebanding machines, hand fed
11. Sawmilling machinery:-
Automatic firewood saws
Breast benches
Circular breakdown saws
Docking saws
Log cut-off swing saws
Post peelers
Splitting saws
Vertical breakdown saws
12. Hydraulic wood or log splitters
13. Machine-tools for bending hard plastic
14. Any composite or multipurpose machine incorporating any of the above
excluded machinery or combination of the above excluded machinery 		FreeFree99999825L9/03..
A8479.89.00Water activated sprinkler alarmsFreeFree99999828E7/03..
A8514.40Industrial heater, being an induction coil wholly encapsulated in a cylinderFreeFree99999831E10/03..
V9405.10Light fittings of GU10, GZ10 or G9 halogen typeFreeFree99999819F9/03..
A9405.10Striplights - T4 and T5 fluorescentFreeFree99999821H9/03..
V9405.10.19)
9405.40.19)		Industrial light fittings, ballast controlled, consisting of the following optional / interchangeable components, viz:
1. Corrosion resistant ballast
2. Anodised aluminium reflectors
3. Prismatic acrylic reflectors
4. Electrical/mechanical disconnect mountings
5. High pressure sodium or metal halide lamp
6. Plastic diffusers		FreeFree99999826J10/03..
A9506.99.19Skate ramp, plasticFreeFree99999830G9/03..

Second Schedule: Concession Approvals Subject to Prescribed Purposes and Conditions

   Rates of Duty  Effective
*Tariff ItemDescription of GoodsNormalPref.Part II Ref.Ref. No.FromTo
IM3923.29.15Four million printed retort vegetable pouches of triple laminateFreeFree99999827G11/0311/04
IM51.12Worsted/combed woollen fabrics of a type used in manufacture of men's suitsFreeFree99999876E12/038/04
 55.15Synthetic and worsted/combed woollen fabrics of a type used in manufacture of men's suits, 400,000m²      
IM5112.30.0868% wool, 20% polyamide, 12% acrylic - 800m²FreeFree99999856L10/036/04
 5112.90.0842% wool, 40% cotton, 18% polyester - 2000m²      

Third Schedule: Concession Approvals Withdrawn

   Rates of Duty  Effective
*Tariff ItemDescription of GoodsNormalPref.Part II Ref.Ref. No.FromTo
 5702.41.11)
5702.41.19)		Machine ... rugs......999455G....
 70.07Motor ... WGN 3/97......999477H....
 84.65Machine-tools ... machinery......996625A....
 9405.10Light ... type......997387H....
 9405.10.19)
9405.40.19)		Industrial ... lamp......994184D....

Fourth Schedule: Applications for Concessions Declined

 Tariff ItemDescription of Goods   Ref. No.  
 3926.90.69Earmuffs, class 4   999820K  

Category of Approval

A -General Approval
CE-Capital Equipment
GT-Goods in Transit
IM-Inputs to Manufacturing - Inability to Supply
MS-Manufacturers' Samples
RUC-Revocation of Unused Concession
S-Shortfall
SS-Special Situation
V-Variation of Existing Concession
X-Administrative Amendment

The concessions approved subject to prescribed purposes and conditions as listed in the Second Schedule to this notice and declined applications for concessions as listed in the Fourth Schedule to this notice will not be published in the Consolidated List of Approvals.

Dated at Wellington this 27th day of November 2003.V.A. MANKS, Ministry of Economic Development.
Back to Top


Jump to main page content.